Beyonwiz DP-P2 Guía de usuario descargar pdf (Pagina 41)

Quick Setup

2) Manual Configuration

If you set “DHCP” to “Disable”, you must input the network settings

manually. Use the

NUMERIC

and

LEFT/RIGHT

buttons to configure

the following items;



IP Address: enter a 12-digit IP address.



Subnet Mask: enter a 12-digit subnet mask.



Gateway: enter a 12-digit gateway.



Primary DNS Server IP: enter a 12-digit primary DNS server IP

address.



Secondary DNS Server IP: enter a 12-digit secondary DNS server IP

address.

Then press the

RED

button to update the LAN settings. A “LAN Status”

pop-up window will now appear to show you the updated LAN settings.

Press

EXIT

to close the “LAN Status” pop-up window

NOTE



If an address you need to input does not have 12 digits, use

preceding 0s to make it 12 digits in length e.g. an address of

“192.168.0.1” must be entered as “192.168.000.001”.



The MAC Address setting will display the MAC address of the Ethernet

interface, but you cannot change it.



You can also press the

GREEN

button to open the “LAN Status” pop-

up window to check your settings.



If you change the DHCP setting

to “Enable”, the manual settings no

longer apply, however they will still display the previously set

configuration values.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 119 120

Comentarios a estos manuales

Sin comentarios

Beyonwiz DP-P2 Guía de usuario Pagina 41

Comentarios a estos manuales

Relacionado con productos y manuales para Grabadores de vídeo digital (dvr) Beyonwiz DP-P2