The playback start position after pause, fast forward, fast rewind was enhanced.
The recording with meta data size bug can be played successfully until its full duration.
The broken recording with 0 second duration can be fixed if its sub-files are safe. But the
fixed duration will be just an estimated value.
A playback glitch of some recording files at around the 20 second mark, where the picture
freezes and audio is lost for ~2 seconds, is fixed.
File playback enhancements:
The subtitle file matching failure bug for the file over 2GB which was copied into the internal
HDD was fixed.
System enhancements:
The dosfsck and mkdosfs were upgraded to 3.0.9. The corrupted file system which cannot be
fixed with previous dosfsck now can be fixed.
The video output will be reset to P-HDMI-AUTO after pressing TV-OUT button over 3
seconds.
Once TV-OUT reset is done, no more TV-OUT button press is processed until TV-OUT
button is released at least 1 second.
The shutdown process of PVR thread before firmware upgrade was enhanced.
Explicit HDD cache enable/disable was removed to enhance the reliability.
The delay between pressing OK in the format warning pop-up and appearing the formatting
pop-up was removed.
The shutdown sequence was rearranged to give more time to save the EPG DB safely.
The timeshift buffer will not be deleted on shutdown. It will be deleted on next boot.
Video will blackout immediately after pressing power off if no more user action is required.
The user actions like channel up/down, volume up/down and etc during checking HDD in
live will be ignored.
The POWER button press will be ignored when the firmware upgrade is on-going.
The bug in the internal messaging system was fixed. But it is not a crucial bug.
The bug that needs to apply setting twice after network setting change was fixed.
The internal HDD will be in standby mode before power off.
The bug in the video output reset by long pressing TVOUT button in the setup was fixed.
The metadata naming bug in the automatic recording file fix process was fixed.
1TB USB HDD now can be formatted successfully (previously actually it was not formatted).
The Check HDD loop when the FATs of the HDD were broken was fixed. But the FAT-
broken HDD cannot be fixed and will be used as read-only for the backup purpose before it is
formatted.
The formatting HDD will add a backup boot sector option and check bad blocks on the meta-
data sectors.
The bug that after applying 4:3 Pan&Scan mode in the Setup but 4:3 Letterbox mode is
shown in live was fixed.
The bug that makes “Clear WizTV Disk Cache” hang was fixed.
The bug that improper power off (e.g. pulling the plug from the wall) does not cause an 'HDD
Check' procedure was fixed.
The zooming to hide scan lines on the top and bottom of screen was removed.
The scan lines on the top and bottom of screen were hidden.
The system resource usage was reduced.
The video default after factory setting was changed to P-HDMI-AUTO.
The IDE HDD speed of the SATA interface was reduced to UDMA3 from UDMA5 to
enhance the stability.
File management enhancements:
Renaming a folder name with a dot in the middle of it now works correctly.
In an empty folder, the up folder ‘..’ will not be counted as 1 item.
Folders are sorted alphabetically when sorting by the orders other than alphabetical order.
Comentarios a estos manuales